The Lakeside Certified Auto Guide to Caring for Your Transmission
Posted July 25, 2021 12:36 PM
Most vehicles have automatic transmissions, yet a lot of Willoughby drivers only have a fuzzy understanding about what a transmission does. Think back to the last time you rode a bike in Willoughby. You started out in a lower gear and shifted to higher gears as you went faster. Down shift for hills, stuff like that. Think of your legs as the engine – there's an ideal speed you can pedal and you change gears to leverage the work you're doing.
Lower gears for power on hills or for starting out. Higher gears for more speed. That's what the automatic transmission does – it automatically starts in lower gears and shifts up to higher gears to go faster on OH roads. And it automatically shifts back down to climb Willoughby hills, pass or start up again.
Vehicle automatic transmissions have certainly gotten more sophisticated in recent years. They have more speeds than before: the base is four speeds, five is very common.
At Lakeside Certified Auto, we routinely service transmissions with six speeds and several have seven or even eight speeds. As you can imagine, this means more parts. Any they all have to fit into roughly the same space.
Transmissions are computer controlled these days, with some high end transmissions having two or three computers. Transmissions are engineered to last. But they are also engineered to tighter tolerances. If a portion of the transmission is starved for lubrication, it can lead to failure.
Not enough fluid can starve the transmission, or dirty transmission fluid can clog small passages in the transmission. Then the lubricant is blocked and can't get to all the parts to protect them, so they wear out prematurely. The technicians at Lakeside Certified Auto see far too many transmissions that needlessly failed due to neglect.
And, as you can imagine, repairing one of these new transmissions at any Willoughby service center can be quite costly. That's why owner’s manuals have a schedule for how often you should change the fluid and what type of fluid to use.
It's really important for Willoughby area drivers to carefully follow the manufacturer's transmission service schedule.
At Lakeside Certified Auto in Willoughby, we hope you never become shiftless in Willoughby because you didn't take care of your transmission.
Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com
Keeping Your Engine Cool in Willoughby, OH
Posted July 18, 2021 7:55 AM
The cooling system keeps OH vehicle's engines from overheating while they are driving around Willoughby. Its job is to move heat away from the engine. Let's talk about the various components of the system and how they make this happen.
The radiator is the part most Willoughby drivers associate with the cooling system. Coolant flows through the radiator which has fine cooling fins that draw the heat out of the coolant and dissipate it into the air. To make sure there's enough airflow over the radiator, a fan pulls air over the cooling fins even when the vehicle is idling.
In some vehicles, the fan is powered by the serpentine belt. On others, an electric motor runs the fan. Electric fans turn on and off as needed. You may have heard the fan kick on shortly after you turn your vehicle off. The sensor has determined that the engine needs a little help cooling down to a safe temperature.
A hose connects the radiator to the water pump. The water pump pushes the water into the vehicle engine block. Now the engine block and cylinder heads have passages for the coolant to pass through without getting into the oil or the combustion chamber. In the automotive community, these passages are referred to as the "water jacket."
While the coolant is passing through the water jacket, it absorbs heat from the vehicle engine on its way to the radiator for cooling. Between the engine and the radiator is a gatekeeper called the thermostat. The thermostat's job is to regulate the temperature of the engine just like your home thermostat regulates the temperature in your house. It gets your engine up to the correct operating temperature and then keeps it from overheating.
When you first start the engine, it's very cold and needs to warm up. So the thermostat blocks the flow of coolant to the radiator. As the engine warms up, the thermostat starts to let coolant flow through the system.
The final component the team at Lakeside Certified Auto wants to point out is the overflow reservoir. This bottle is designed to hold some of the coolant. It'll have a mark that indicates whether or not you have enough coolant. This is where you should add coolant if you just need to top it off.
Caution: never open the reservoir or the radiator cap when the car's hot. The cooling system is pressurized, and opening those caps while it's hot can cause hot coolant and steam to escape resulting in serious burns.
Cooling system failure is the most common mechanical failure in vehicles around Willoughby, OH. At Lakeside Certified Auto, we can do a periodic inspection of the components for leaks, loose connections and weakening hoses.
Your vehicle manufacturer has also specified a cooling system service interval. With a cooling system service at Lakeside Certified Auto in Willoughby, the old coolant is replaced with correct clean fluid that contains the additives required to prevent corrosion. The additives are depleted over time and you need fresh fluid for adequate protection. Your radiator pressure cap should be replaced at this service as well.
Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com
Power Steering Service in Willoughby
Posted July 11, 2021 8:28 AM
Most Willoughby drivers are too young to remember life before power steering - cranking those great big steering wheels! It was a pretty good workout. Now power steering is standard. Let's look at how it works. The heart of any power steering system is its pump. The pump pressurizes the power steering fluid that provides assist for steering. Most pumps are driven by a belt that is run by the engine; a few are electrically powered. A high-pressure hose passes fluid from the pump to the steering gear. A low pressure hose returns the fluid back to the pump.
These hoses can develop leaks, so it is a good idea for Willoughby drivers to have them inspected at every oil change. Low fluid can damage the power steering pump. That is why power steering fluid level is on the checklist for a full-service oil change. The fluid needs to be compatible with the hoses and seals, so check your owner's manual for the right type - or just ask your friendly and knowledgeable pros at Lakeside Certified Auto in Willoughby.
The fluid cleans, cools and lubricates the power steering system. It breaks down as the years go by and collects unwanted moisture, so Willoughby drivers need to replace it from time to time. Many vehicle manufacturers specify power steering service intervals. Unfortunately, this important service is sometimes left off the car maintenance schedule for many of us. So, when in doubt, every 25,000 miles/40,000 km or two years is a good fallback. Your technician at Lakeside Certified Auto will use a detergent to clean the system, flush out the old fluid and replace it with the good stuff.
Here are some warning signs of trouble with your power steering: It's harder to turn the wheel, there's erratic power assist, you hear loud whining coming from the pump (which may be difficult to hear over the loud whining coming from the backseat), you have to top-off the fluid frequently, or you hear squealing belts. Remember to never hold the steering wheel to the far right or left for more than a few seconds at a time. That will wear out your power steering pump quickly.
Other steering components can be bent or damaged from wear or hard knocks: ball-joint, idler-arm, steering-gear, steering-knuckle and tie rod to name a few. Warning signs here are steering play, wandering, uneven tire wear and an off-center steering wheel. An annual alignment check at Lakeside Certified Auto in Willoughby will reveal bent or damaged steering components.
Most SUV's, pick-ups and rear-wheel-drive cars need regular front-wheel-bearing service.
The bearings should be cleaned and inspected. If they are excessively worn, they need to be replaced. The bearings are then repacked in clean grease. The team at Lakeside Certified Auto also recommends the wheel-seal be replaced when the bearings are serviced. Like everything else, check your owners' manual maintenance schedule. It's usually required around every two years or 40,000 miles/64,000 km. If you drive through water in the Willoughby area, the bearings will need service more often.
Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com
All Lined Up: Wheel Alignment Service at Lakeside Certified Auto
Posted July 4, 2021 7:34 AM
When all of your vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Hitting a road hazard or even just the normal bumps and bounces of everyday driving in Willoughby can cause your vehicle's wheels to be out of alignment.
Driving for an extended time around Willoughby when your wheels are out of alignment results in uneven tire wear. This is dangerous … and expensive. Worst case scenario, you have a blowout on a crowded OH highway. It can also cause premature wear to your suspension system, which can be really expensive to repair. At the very least, you may have to replace your tires years too early.
The ideal alignment for your vehicle was designed by its engineers. Alignment service at Lakeside Certified Auto starts with an inspection of the steering and suspension – to see if anything's bent or broken. Then your friendly and knowledgeable Lakeside Certified Auto technician will look at tire condition.
From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. The wheels are then aligned to vehicle’s specifications.
Your vehicle owner's manual probably has a recommendation for how often your alignment should be checked – usually every couple of years. If you suspect an alignment problem, get it checked at Lakeside Certified Auto before you suffer expensive tire or suspension damage.
Lakeside Certified Auto
38525 Lakeshore Blvd
Willoughby, OH 44094
(440) 946-0076
http://www.lakesidecertifiedauto.com